How to Check The Quality of Custom Made Furniture？

For those who are rarely touch the customized furniture technology in daily life,it is really a very difficult issue for them to process production inspection and acceptance on site. As a professional China furniture fabrication factory who has been deeply dedicated to China furniture manufacturing market for more than 10 years, we would like to share with you three key points you need to know when conducting inspection and acceptance of custom made furniture today.

1. Visual Inspection
   Furniture is inseparable from our daily life, its appearance decides the quality of our life.While conducting inspection and acceptance of bespoke furniture.The first step is to inspect whether the collocation of color,pattern,and texture is harmonious.
   And the finishing material and painting process should be roughly the same.Then inspect the smoothness and brightness of the furniture,whether there are wrinkles,air bubbles and flow problems. After that you need to check whether there is chromatic aberration in the veneered panels, the pattern is consistent or not,and and whether there are problems such as knots and corrosion points; Whether the edge sealing of all kinds of artificial board is qualified.
2. Process Inspection
   Only the exquisite craftsmanship can produce the sophisticated products. If a piece of furniture is made by rough work, it is hard to imagine that it will be a piece of high quality custom furniture.Therefore,when you inspect the quality of custom furniture,you must focus on all the details of the production process. Including the rationality of the link points between each component, the firmness of the components, the quality of the hardware, the tightness between the hardware and the furniture. The horizontal connection points and vertical connection points of the overall structural furniture must be close together without loose and gaps. The drawers and cabinet doors can be open and closed flexibly and returned to the original position accurately. The glass door is polished neatly and without any scratch.All kinds of accessories should be installed in correct position,ensure that they are firm and stable and could be open flexibly.
3. Structural inspection
   Whether the custom built furniture can be used for a long time, the key point depends on the structure. The first step of acceptance is to check whether the structure of the furniture is reasonable and whether the frame is correct and firm. The second step of acceptance is to check the verticality of the furniture: when the plane diagonal length is greater than 1 m, the vertical direction error should be less than 1.5 mm; when less than 1 m, the error should be less than 1 mm. The third step of acceptance is to check its warpage: when the plane diagonal length is greater than 1.4 meters, the warpage should be less than 2 mm, and when the diagonal length is less than 0.7 m, the warpage should be less than 0.5 mm. If there is noise, sway, and and beyond the error range, it is not qualified.

We wish the above 3 points could help you solve the quality acceptance problem of customized furniture.As long as you inspect carefully according to these 3 key points, if no problem is found, the quality of your furniture is basically qualified.If you are interested in customized furniture manufacturing, Pls contact us via whatsapp and discuss the details 0086-189 2320 6053.